When you are online and you get an error message which causes an unfortunate BSoD ( blue screen of death) it may happen that you have probably got a Kernel Security Check Failure. It can also be caused while you are trying to install or run Windows 10.
Also Read: Discord Names
In this article, we will overlook all the information which will help you to gain the best knowledge about the kernel Security Check failure and we will also look up to the various causes behind its occurrence followed up with the methods which will help you to fix the kernel Security Check failure easily so without any delay let’s get direct deep into the article.
Kernel Security Check Failure
The most frustrating thing for a user is their blue screen of death (BSoD) error on your window pc. It prevents you from working on your PC until you fix that particular problem. Many errors lead to a blue screen of death and kernel Security Check failure is one of them.
Also Read: How to Get Chegg for Free 2021
It occurs usually when there are one or many corrupted system files present in your system. You can encounter this error while you are doing the following things which we have listed below.
- It can occur after you upgrade the RAM.
- Kernel Security Check failure when playing your favourite game.
- Kernel Security Check failure when installing various apps and programs.
Why Kernel Security Check Failure occurs
We would be able to fit any issue only if we know the clear vision behind its occurrence. The below-listed points which we have compiled for you will help you to understand the cause which is responsible for the occurrence of kernel Security Check Failure.
- It can be there that your memory is not in the best condition.
- You are using an outdated driver.
- If you got the virus of Malware.
- If there are one or many corrupted Window system files present in the computer.
- A damaged and corrupted hard disk file.
If we have to select the most common reason out of it, that will be an incompatible driver especially when you upgrade to Window 8 or Window 10 because it might happen that the driver which was working good for the previous version could have created problems for the new version. That’s why in such a case the system throws this error.
How to fix kernel security check failure
There is one thing that is very unacceptable in the case of kernel Security Check failure is that you will not get what the problem is when you encounter the message full stop you can only estimate what can be the reason for getting this issue.
Also Read: Paladins Codes
After a research study conducted by a team and considering the declaration of many users, we have piled up a few methods that are practical and reliable and found useful by many users who have got this kernel Security Check failure error or we can say 0x139 error now let’s see what you need to do.
Memory problem
If the issue is caused by the memory you can identify the issue with memory Diagnostic tools which are available for window 10 8 and 7 it will help you to test the RAM on your computer just you have to go to the control panel and type memory in the search by area and then play onto the diagnose Computer memory problem.
To open this tool you can also type a command ‘matched start and search and open this tool by hitting enter after this restart your computer after saving your work and check whether the issue persists or not.
Viruses
If you are unable to fix the issue we recommend you to once check if there is any virus or ransomware which is causing the problem. If there is any virus take all the necessary steps to move out the virus from your computer.
Enable legacy advanced boot menu
You need to follow these run-down steps to enable the Legacy advanced boot menu.
- You have to restart your computer and insert window 10 bootable media into the optical media drive.
- Now once it has been executed type exit to close the command prompt window.
- You have to again go to the choose an option screen and click continue after that just restart your computer.
Update your driver
As we have discussed earlier a BSOD error can be caused by a corrupted driver so if you Should replace or update your driver’s full stop it might be the cause that was creating trouble you can do this manually using the device manager.
Check your hard drive
This you have to make sure that your hard drive functions correctly so check if it is plugged correctly or not. You can change the hard drive and can see whether the problem is solved or not. If the problem that solves after you restart your computer and changing the hard drive is well and good it might be the only cause behind it because as we have discussed earlier we can only estimate that what can be the cause behind the occurrence of this error you have check every single detail for getting the things to work properly.
Check the memory slot
You should not forget to check the memory slot to check whether it is placed correctly or not or if it is functioning well or not. You can replace the memory slot or change the slot in which it has been plugged into the motherboard. Now boot your computer and see whether the problem gets solved or not.
Conclusion
In this article, we have covered all the things related to kernel Security Check failure and we tried our best to give you the whole information in an easy manner to let you know about the kernel Security Check failure and how to fix it up by trying different methods we hope that you can get out of this problem by reading this article.
Leave a Reply